We would like the always-available zoom feature built into Apple's iPhone OS to be added as a standard OS feature, via an update, on all Android smartphones and tablets.
Tax included. The first payment is slightly higher because of rounding. 48 payments: Rakuten Card only (0% APR). The 512GB figures follow press reports (Keitai Watch); please check Rakuten Mobile for the latest.
Up to 16,000 points back when switching from another carrier for the first time (pre-entry required). The 256GB model works out to 69,900 yen with those points (no trade-in; Rakuten's own estimate).
(価格・条件は2026-10-26時点の楽天モバイル公式ページ記載。最新は公式で確認。Pixel 11・10aの分) Prices and terms as listed on the Rakuten Mobile official pages on 2026-10-26 (Pixel 11 and 10a). Please check the official pages for the latest.
Title With a fully balanced design, going mono makes it easy to add a subwoofer output.
For a fully balanced integrated amplifier, wouldn't it be easy to design, manufacture and sell a mono subwoofer output on both XLR and RCA, as part of the pre-out? Please also describe the benefits of making the subwoofer output mono. I put this question to a paid AI called Claude.
Yes, it is technically quite easy. The extra parts are only one or two op-amps, some resistors and XLR/RCA jacks, so the cost is small. However, there are a few points to get right if you want a clean result.
Design points ・Mixing position: If you sum L+R after the volume control, the subwoofer level follows the main volume. ・Balanced summing: Sum the Hot signals together and the Cold signals together, each through its own resistors, and receive them with a buffer. This keeps the circuit fully balanced and gives a mono XLR output. ・RCA output: Feed it through a differential-to-single-ended conversion circuit. Simply taking only the Hot signal is easy, but it is worse for noise. ・Channel isolation: Use summing resistors of roughly a few kΩ to 10 kΩ. This prevents the main L/R outputs from interfering with each other and prevents crosstalk from getting worse. ・Buffer insertion: Make sure the subwoofer's input impedance does not load the main pre-outs. ・Gain adjustment: Highly correlated bass rises by about +6 dB when summed, so compensate the gain with the resistor values. ・Options: A Stereo/Mono switch, a simple low-pass filter (about 80–120 Hz) and a phase-invert switch would make the product more attractive.
Benefits of a mono subwoofer output ・Little effect on imaging: Bass below about 100 Hz has almost no sense of direction, so mono causes virtually no disadvantage in listening. ・Simple connection: One cable is enough. It connects directly to subwoofers that have only a mono input, and no Y-splitter cable is needed. ・Good match with the source: In mixing, bass is generally placed in the center, and vinyl records also have their low frequencies made mono because of cutting limitations. ・Better S/N ratio: Summing L+R raises the signal level, which is advantageous against noise on the subwoofer side. ・Easy multi-unit use: When two or more subwoofers are placed at different positions in the room to even out room modes (standing waves), sending the same mono signal to all of them is the basic approach. ・Compatibility with balanced transmission: The cable run to the subwoofer tends to be long, and XLR is resistant to hum and ground loops, so it shows its real value here.
Cautions (drawbacks) ・Out-of-phase bass (some live recordings, synthesizer sources, etc.) cancels when summed and sounds thin. ・For people who want stereo low-frequency imaging (spatial spread) with two subwoofers, it is safest to include a switch. ・On the manufacturing and sales side, the circuit is small and can be handled by adding a board or mounting it on an existing board. For a mid-price or higher fully balanced amplifier, it is a strong enough point of differentiation.
On the rear panel in the photo there are PROCESSOR SEND / RETURN jacks (1 and 2) and POWER AMP DIRECT inputs (normal 1 and 2, balanced XLR). No terminal marked PRE OUT is visible in this photo. Which terminal a subwoofer should use, and whether it follows the volume control, must be confirmed in the owner's manual.
Among DENON's integrated amplifiers with a subwoofer output, it is one of the better-sounding ones. Please note that there are also many high-end models that do not have a subwoofer output.
写真: DENON 公式の製品ページの画像です。 / Photos: from the official DENON product page.
The EXT.PRE on the PMA-2500NE is not for a subwoofer. According to what I found in searches, there appears to be no dedicated pre-out to which a subwoofer can be connected. The owner's manual (rear panel and specifications) also lists no pre-out. (Sources: Rear panel / Specifications / StereoNET)
EXT.PRE is an input terminal. It is a terminal for feeding in the signal of an external preamplifier so that the unit can be used as a power amplifier; it is not a terminal that outputs a signal. A subwoofer cannot be connected here. The Japanese and English Denon owner's manuals state that the volume in this case is adjusted on the connected device (owner's manual: rear panel / connecting a pre-amplifier).
The output appears to stop at REC OUT. On a forum, someone wrote that it is a fixed-volume REC output and not suited to other equipment (StereoNET).
出力は REC OUT 止まりのようです。 フォーラムでは、音量固定のREC出力で、他の機器には向かないという書き込みがありました(StereoNET(英語))。
SA11 との違い: SA11 (PMA-SA11) の背面には PRE OUT 端子があり、Denon の取扱説明書では「パワーアンプやパワーアンプ内蔵型のサブウーファーなどを増設するときに使用します」とされています。(参考: PMA-SA11 取扱説明書)
Difference from the PMA-2500NE: the SA11 (PMA-SA11) has a PRE OUT terminal on its rear panel; Denon's owner's manual says it is used to add a power amplifier or a subwoofer with a built-in power amplifier. (Source: PMA-SA11 owner's manual (Japanese))
Reviews of the PMA-SA11 (summary) A summary of the Kakaku.com review by Dyna-udia (titled “a classic that balances vigor and fine detail”). Full text: Kakaku.com review (Japanese) - Punchy and energetic in the Denon way, with more finesse than the lower models. List price is in the 400,000-yen class, but street prices have fallen to the mid-200,000-yen range. - Plenty of bass, a round and warm sound, the opposite of a dry digital amp; relaxing to listen to. - A very attractive match with the B&W 805SD; the ATC SCM19 is hard to drive and its bass felt under-controlled. - Swapping in a LUXMAN L-507uX gave a cleaner, more detailed but nervous and drier sound. In audiophile terms the L-507uX is better, yet for laid-back material such as 1950s Ella Fitzgerald ballads the PMA-SA11 fit better. - Conclusion: the right amplifier depends on what music you play.
PMA-SA11 vs LUXMAN L-507uX (detailed summary) A paraphrase, in my own words, of the part of the Kakaku.com review by Dyna-udia (original, Japanese) that compares the two amplifiers. 1. The reviewer first played 1950s jazz vocals (Ella Fitzgerald ballads) on the PMA-SA11. The glossy, laid-back mood suited the amp's character and felt relaxing. 2. Out of curiosity they switched to the L-507uX, whose character is the opposite. Fine detail became audible, but the sound felt nervous and the pleasant atmosphere was gone. 3. The reason, they say: the PMA-SA11's slightly smeared bass and mild haziness created the slow, easy feel. With the L-507uX that roughness vanished, leaving a clean but bland sound. Its speed, crispness and clarity seemed to strip away some of the music's savour. 4. Summing up: as an audio component the L-507uX is the better one, but for music meant to be enjoyed at ease the PMA-SA11 clearly matched better. 5. An analogy: the PMA-SA11 is like an electric guitar with heavy distortion, turning rough edges into flavour; the L-507uX is like a clean semi-hollow jazz guitar with no effects. 6. A fair word for the L-507uX: with matching material it clearly sounds like a 500,000-yen-class amplifier, but it is wasted if the source does not suit its character. The listening session showed how much it matters what music you play. The wording differs from the original; please read the original for the exact content.
Digital Art Museum (デジタル美術館のアイデア)& 保育園&幼稚園&小中高校& 小学生と中学生向け学童保育 & 温泉はその土地で出なければ配達とスーパー銭湯 ボーリング & GAMEセンター &JAZZカフェレストラン(学校給食&社食)& 3WAYカーオーディオは、フロントのピラーに(スーパー)ツィーター&スコーカー埋め込み対応をイエローハット&オートバックスのお店も一緒に経営して行なうサービス&不動産と建設と工務店と新車と中古車の自動車の売買と保険とスマホはフィルムやガラスフィルムも自動で貼る自動契約機能付き自動販売機などの融合店のアイデア
Digital Art Museum (デジタル美術館のアイデア)& 保育園&幼稚園&小中高校& 小学生と中学生向け学童保育 & スーパー銭湯 &JAZZカフェレストラン(学校給食&社食)& 3WAYカーオーディオは、フロントのピラーに(スーパー)ツィーター&スコーカー埋め込み対応をイエローハット&オートバックスのお店も一緒に経営して行なうサービス&不動産と建設と工務店と新車と中古車の自動車の売買と保険の融合店のアイデア
【海外の反応】塩水で発電を日本が実用化へ!世界中の電力会社が諦めた開発に世界中が大注目の理由 [Reactions from overseas] Japan moves to put salt-water power generation into practical use! Why the world is watching a development that power companies worldwide gave up on
Googleを落ちた高卒の23歳が世界を変えた実話 The true story of a 23-year-old high-school graduate who failed Google and changed the world
As of October 2026, advertising has shifted from TV, newspapers and magazines to the web, such as YouTube and social media, so the way we promote things has to change too! As the President and CEO of AON Co., Ltd., Masahiro Ishizuka, I would like to launch an advertising agency business as soon as possible.
Can Claude develop ASICs, embedded apps and device drivers in C++ or Rust?
To build smartphone apps and websites in Rust + RPoem without HTML5, CSS3, TypeScript, Node.js or REST APIs, it seems the yield is better if I give Claude the official URLs, GitHub and blog URLs of Rust, RPoem and Poem to read as needed, and have it regularly read and write files such as README, CLAUDE and PORTING while developing. What do you think?
This answer is based on reading the README, PORTING and CLAUDE files in the official RPoem GitHub repository.
RPoem is a Rust platform that makes REST APIs unnecessary through GraphQL COSMO, with compatible Poem and Tauri functionality built from scratch in Rust. Its admin UI uses neither TypeScript nor Node.js; it is built in Rust and compiled to WebAssembly.
RPoem is compatible with WunderGraph COSMO, whose purpose is to make REST unnecessary.
What RPoem actually is
A GraphQL COSMO platform written in Rust.
Both Poem (backend) and Tauri (frontend) are rebuilt from scratch as compatible functionality, without depending on those packages.
REST can be made unnecessary. PORTING says "REST API not needed".
The admin UI is built in Rust, compiled to WebAssembly, and is documented as "no TypeScript/Node.js".
There is an Android folder (android/) and a Windows tray app (apps/desktop-tray).
1. Can ASICs, embedded software and device drivers be developed in C++ or Rust?
Yes, but the range of what can be done differs. The RPoem documents say nothing about embedded or driver development (RPoem is a platform for the web and servers), so the following describes Claude in general.
Embedded and device drivers: Claude can help write, review and debug code in either C/C++ or Rust.
This covers embedded Rust (no_std, embedded-hal, RTIC, Embassy, etc.), Linux kernel modules and Windows drivers (WDK).
Hardware-dependent parts (register behavior, timing, interrupts) are easy to get wrong without datasheets or logs from the real device.
Flashing and running it on real hardware must ultimately be verified by a person.
ASIC: the actual design is done in hardware description languages (Verilog, SystemVerilog, VHDL), or hardware languages such as Chisel.
Claude can write RTL, testbenches and verification scripts.
Logic synthesis, place and route and timing closure need EDA tools (many are paid).
Claude cannot run those tools for you, and any design sent to manufacturing requires expert review.
Safety-critical fields (automotive, medical, aviation): do not use generated code as is; assume verification and review according to the relevant standards.
2. Is it better to give official URLs and have Claude read and write README, CLAUDE and PORTING files?
Yes, this approach improves the yield. RPoem itself says PORTING.md alone is enough to adopt it, and relies on that way of working.
Provide official URLs and GitHub:
New, self-made components such as RPoem are likely unknown to Claude beforehand.
Having it read the relevant code and README reduces mistakes made by guessing.
Specify the version or commit when you have it read, to avoid outdated information.
The top of the RPoem README says dependencies were updated to the latest major versions on 2026-10-28, so premises may have changed recently.
Have it read and write README, CLAUDE.md and PORTING.md:
When a conversation gets long, earlier content is lost to summarization, so keeping it in files is effective.
Writing down decisions, environment pitfalls, unfinished work and resume steps lets the next session resume quickly.
CLAUDE.md is a dated history of about 350 KB. Do not have it read everything; have it search for and read the latest entries and the relevant parts.
Stale entries become wrong premises, so have it update the files with every request.
Other things that help:
Run tests and builds every time.
Do not skip checks on real devices and in the browser.
Split requests into small pieces.
3. Can smartphone apps and websites be built without HTML5, CSS3, TypeScript, Node.js or REST APIs?
TypeScript and Node.js: the admin UI is built in Rust and compiled to WebAssembly, and the documents explicitly say they are not used.
REST API: not used. RPoem is compatible with WunderGraph COSMO, which makes REST unnecessary, and the app's API is consolidated into GraphQL.
HTML5 and CSS3: the foundation of browser display remains HTML and CSS, and WebAssembly is also loaded from HTML. "Not written by hand" is more accurate than "not used".
Server side: it can be built with Rust + RPoem alone.
Smartphones: the goal in docs/tauri-parity.md is "iOS/Android from a single codebase". An android/ folder exists, but from what I read I could not confirm that iOS is complete on real devices. Distribution must follow each OS's process (signing, stores).
Recommendation
Keep to the policy of making general-purpose logic a shared component in RPoem, and keep the README, CLAUDE and PORTING workflow as it is. Only the visual appearance is more stable written in HTML5 + CSS3 (the slides above are also made with HTML5 + CSS3).
As an introduction to audio, there are also stores, such as 100-yen shops, that sell items intended for connecting to Sony Walkman players, DAPs (digital audio players), smartphones, tablets, and PCs, priced from 110 yen including consumption tax up to a few thousand yen at most: Bluetooth models, USB Type-C and 3.5mm stereo connector models, and, from 500 yen, wired 3.5mm connectors that let you connect earphones or headphones and listen to music while charging your smartphone.
Among wireless connections, Wi-Fi sounds better than Bluetooth if the equipment supports it. Furthermore, wired connections are less prone to picking up noise and therefore sound better, and among earphones and headphones with 3.5mm, 4.4mm, or XLR connections, there are also clip-on (ear-hook) types that can be used even while lying on a pillow in bed.
In addition, Rakuten Mobile appears to offer unlimited data coverage across a wide area of Japan wherever a Rakuten Mobile antenna is nearby, and it seems that a growing number of people are listening to or watching YouTube, U-NEXT, music apps, and music sites.
As a popular USB DAC model that has an I2S input terminal for I2S from a DDC's HDMI (I2S) output and is considered inexpensive with good sound quality as of September 20, 2026, I recommend the following.
The GUSTARD U18 DDC can be connected directly over I2S (HDMI). I have not confirmed this connection myself. For I2S, a product called the MUSICIAN Pisces III is a little more expensive, but I think it is the better DDC in terms of sound quality.
Just to be clear, a DDC on its own produces no sound. You connect the DDC to a PC, smartphone or similar over USB, buy a USB DAC that has an I2S input, and connect the DDC to that USB DAC over I2S (HDMI).
For headphones, a 4.4 mm balanced connection is said to sound better than 3.5 mm, and a stereo connection using two mono XLR connectors is said to sound best of all. When connecting to speakers through an amplifier, an XLR connection is said to sound better than RCA coaxial. Some hobbyists also enjoy the differences in sound they get by swapping in higher-quality connectors and cables.
To attach a speaker cable to a banana plug, strip twice the usual length of insulation, double the strands over to make the conductor twice as thick, and fold it back before inserting it.
Personally, if there were a company willing to modify the amplifier and the speakers to accept XLR balanced connectors instead of banana plugs, including bi-wiring (bi-amping) support, that connection would lock firmly and plug and unplug securely, and only then could I finally listen to music in good sound with peace of mind.
熱心なAUDIOファンで音質の良い、MUSICIAN AUDIOのPISCES IIIと言うDDC(GustardのDDCのU18よりロスレスのI2Sなので音質が良いとされております。2026年9月16日現在、Amazon USAではMUSICIAN Pisces II(2)しか販売されておらず、Amazon JapanではMUSICIAN Pisces III(3)を販売中で御座います。)+USB-DAC次期製品を希望している者と致しまして、 As an avid AUDIO fan hoping for a good-sounding next-generation DDC + USB-DAC — specifically MUSICIAN AUDIO's PISCES II (2) DDC (said to sound better than Gustard's U18 DDC thanks to its lossless I2S; note: as of September 16, 2026, only the MUSICIAN Pisces II was available on Amazon USA, while the MUSICIAN Pisces Ⅲ(3) is being sold on Amazon Japan) — my request is as follows:
English: As the next product in the Musician Audio "USB DAC PEGASUSⅢ (3)" series, as an idea for the USB DAC PEGASUS IV (4), I would like the new model to carry over PEGASUS III (3)'s automatic 110V–240V input voltage switching and lossless I2S (HDMI) support as-is. Rather than an R2R design, I would like the successor model to feature four (quad configuration) of ROHM's flagship D/A converter ICs, the "BD34302EKV," combined with Asahi Kasei Microdevices' (AKM) "AK4191," a chip dedicated to digital signal processing and delta-sigma modulation, for a dual-DAC configuration.
I would also like it to include a low-noise, high-fidelity vacuum tube stage, with the tube circuit switchable by an ON/OFF switch.
Furthermore, just like Musician Audio's standard USB DACs, I would like automatic 110V–240V input voltage switching to be built into USB DACs from other manufacturers such as SMSL and Gustard. I would also like the same 110V–240V automatic switching in the amplifiers and USB DACs of Japanese audio manufacturers such as Accuphase, LUXMAN, and UESUGI.
It is said that audio products sound better when they can be switched to 220V–230V, whether they are export models for markets outside Japan, foreign-made products, or even products intended for the Japanese domestic market. Ideally, I would also like manufacturers to guarantee the use of such equipment switched to 220V–230V, even when a step-up transformer is used.
Furthermore, I would like Tokyo Electric Power Company to newly design, develop, and offer for sale or rental a dedicated audio distribution board that goes beyond 200V switching: one with a step-up transformer function for 220V–230V and support for 100V, 110V, 200V, and 220V–230V. I would also like a gas power generation system that runs on either city gas or propane gas, offered in the same way, for audio enthusiasts and hobbyists who prefer low-noise power. I am writing down these ideas here as a proposal.
For power, I would like an external linear DC power supply. I would also like a special-order option to install custom, handmade transformers wound by hand by skilled artisans.
In addition, I would like an option that supports special, high-sound-quality power cables conforming to the IEC 60320 C19/C20 standard (the international high-current inlet standard used in Europe and elsewhere, rated 16 A at 250 V, and 20 A under North American ratings). I sincerely hope you will release such a next-generation product.
日本語: LOXJIE D40 PRO のヘッドホンアンプ機能とゲイン調整機能がD3Rには無いです。AIT DAC AK4191/BD34302 (2026ver) に+ヘッドホンアンプ機能とゲイン調整機能とロスレスI2Sと電源は100Vから240V自動対応を追加して欲しい。
English: The SMSL D3R does not have the headphone amplifier function or the gain adjustment function that the LOXJIE D40 PRO has. I would like the AIT DAC AK4191/BD34302 (2026ver) to additionally have a headphone amplifier function, a gain adjustment function, lossless I2S, and a power supply that automatically supports 100V to 240V.
Even though the first-generation Focal Utopia costs around 500,000 yen and is notoriously prone to breaking, many die-hard headphone audiophiles swear by it. Its high resolution and remarkably lifelike, musical sound quality are so captivating that they don't mind repeatedly repairing it just to keep enjoying its sound.
Generally speaking, the sound of Accuphase amplifiers is often described as having high resolution and excellent sound quality, said to be the closest match to the sound of the high-end FOCAL UTOPIA (first generation). That said, because of its high resolution, some listeners find it can grow tiresome over time, so sound preference really comes down to the individual. In that sense — when it comes to sound that doesn't tire the ear even after long listening — some people instead prefer UESUGI amplifiers, LUXMAN amplifiers, Macintosh amplifiers, or Pass Labs amplifiers, or SPEC amplifiers — it really seems that preferences differ from person to person.
For today's wireless Earphones and Headphones, Wi-Fi offers better sound quality than Bluetooth, and a 4.4mm Balanced connection is said to sound better than 3.5mm — and further, if the Headphone Amplifier supports it, connecting via two (DUAL) XLR MONAURAL cables to two (DUAL) LUXMAN P-100 CENTENNIAL units is said to sound even better than an XLR STEREO connection.
寝室などで枕に寝転びながら音楽を聴く時に耳が痛くなりにくい耳掛け式ヘッドホンとしては最適。
The ideal pain-free clip-on headphones for listening to music in bed.
As a comment: not only integrated amplifiers, but also headphone amplifiers with a built-in USB DAC could be given a subwoofer output. There may well be people who would like to supplement the bass with a subwoofer while listening to music or watching videos through headphones or earphones at the same time. Ideally, I would like both RCA and XLR (or 4.4mm balanced) subwoofer outputs to be provided.
DENON PMA600NE https://kakaku.com/item/K0001182074/ PMA600NEにはPRE OUT端子(サブウーファー接続用)が付いております。 The PMA600NE has a PRE OUT terminal (for connecting a subwoofer).
DENON PMA-900HNE https://kakaku.com/item/K0001442122/ PMA-900HNEにはPRE OUT端子(サブウーファー接続用)が付いております。 The PMA-900HNE has a PRE OUT terminal (for connecting a subwoofer).
It is said that Japanese stone tablets and a massive UFO were excavated from underground near the Pyramids and the Sphinx in Egypt, as well as in the Inca region. The Quran (Koran) of Islam was created by translating the Christian Bible into Arabic. The representative of the translators is the Muhammad brothers. The first thing that the people who translated the Bible into Arabic and created the Quran built in Islamic countries was Christian churches. When I was a student, I probably saw on NHK Channel 3 TV that, while that church was being cleaned, images of Christ, crosses, and similar items emerged from inside; I believe that should be broadcast on TV news around the world.
Muslim believers around the world are now working to defeat the DS (Deep State), the Great Reset, and other genocide schemes that plan to destroy all of humanity other than Christians, Jews, and white people. To stop those who seek to destroy the world through misguided interpretations of the Holy Bible, what is spreading around the world right now — surpassing Christianity, Judaism, and Islam — is Japan’s Shinto faith in the eight million gods (yaoyorozu no kami), a nature-based religion, as well as the hidden-god Yahweh faith found in Japanese shrines. Surpassing even those is the growing global boom in the Japanese language (an ancient tongue that later influenced Sumerian and Hebrew), Japanese cuisine, visits to Shinto shrines, Buddhist temples, and hot springs in Nara and Kyoto, and the worldwide explosion of Japanese manga, anime, and gaming — with people passionately declaring that dressing up in costume as their favorite characters and singing anime songs in Japanese is their very reason for living. These are the heartfelt feelings of people all around the world who love Japanese culture with such fervor.
On top of all that, as Japan becomes a leader of initiatives for Asia and the world, it is our sincere hope that Iran, Iraq, Saudi Arabia, Dubai, Egypt, Asia, Russia, Ukraine, America, India, and all nations of the world will take each other’s hands, and that through love, courage, and friendship, the whole world will become a leader of global initiatives — through things like a YouTube video by a Japanese university professor who succeeded in greening the desert, and a YouTube video about the successful cultivation of coral that resists bleaching — so that environmental protection of the earth’s natural world may advance around the world, and so that through trade, online business, and other activities for the public good and national benefit, economies around the world may flourish.
Furthermore, by making full use of smartphones, tablets, PCs, AI teachers, and rental servers to their fullest, let us reform and improve school education, and provide training for working adults, corporate training, IT, WEB, DATABASE, AI, semiconductor engineer development, English conversation education, Japanese language education, bookkeeping, accounting, and business management development, training for carpenters and first-class architects, and education for obtaining U.S. data scientist qualifications — so that we may cultivate people who are capable anywhere, leaving no one behind! Let us cultivate people of whom we can be proud anywhere, leaving no one behind!
While protecting the earth’s natural environment and advancing economic development around the world, we look forward to the emergence of many internationally exemplary leaders and messiahs from all over the world. May our descendants prosper, and may all of humanity coexist and flourish together.
The Quran (Koran) of Islam was created by translating the Christian Bible into Arabic. The representative of the translators is the Muhammad brothers.
The first thing that the people who translated the Bible into Arabic and created the Quran built in Islamic countries was Christian churches. When I was a student, I probably saw on NHK Channel 3 TV that, while that church was being cleaned, images of Christ, crosses, and similar items emerged from inside; I believe that should be broadcast on TV news around the world.